Hear Technologies XOUT Extreme Extender (ADAT Out) convert ADAT optical to a HearBus signal up to 500ft

This listing is for ADAT® Out only. Use description below as a general reference.

The Extreme Extender ADAT® In & Extreme Extender ADAT® Out convert ADAT® optical to a HearBus signal, using CAT5E, to extend connections an additional 500 feet.

The Extreme Extender ADAT® In has an ADAT® optical input. A buffered ADAT® thru acts as an optical splitter to give local ADAT® connection to the source. The Extreme Extender ADAT® In output is a RJ45 HearBus connection for the CAT5E cable. The Extreme Extender ADAT® In uses a 9 Volt DC supply to power the system. (When used with Hear Back system power is supplied from the HearBus Hub connection).

The Extreme Extender ADAT® Out has a RJ45 HearBus input connector and two ADAT® optical outputs. A bus status indicator is provided. A bi-color clock status LED indicates the presence (green) or absence (red) of the ADAT clock.

In addition to acting as an ADAT® optical extender, the Extreme Extender ADAT® In may be connected to the optical output of any ADAT® device, such as a DAW, mixer, etc. and connected to the input of a Hear Back hub. The extreme extender ADAT® Out can be connected to the HearBus out of a hub to obtain two ADAT® outputs.

Extreme Extender Features:

• Extend ADAT® Optical cables up to 500 ft
• Uses standard Cat5E cables
• Does not affect sound quality
• Small size, durable construction
• Status LED's