The CCS4USB switch is a new milestone in command and control switching that can deliver bi-directional audio, True Emulation technology and USB 2.0. This switch can be used with  DVI, DisplayPort, VGA and other formats, so it is video independent. It allows users to work with all four screens and computers as though they were a one interface.

The unique True Emulation technology engineered by Adder allows a reliable and instantaneous hotkey switching, and it also supports extra features and keys for enhanced mice and keyboards. The CCS4USB has two independently switchable Hi Speed USB 2.0 channels and audio channel which gives users  flexibility attaching selected peripherals to different computers.

Free Flow Technology

Automated switching for mouse, which works with CCS4USB allows users to switch between target computers automatically, simply by placing the mouse pointer from one screen onto another.

True Emulation USB 2.0 technology

The ADDER’s advanced True USB Emulation technology is featured for the first time by Command and Control CCS4USB switch. Emulated USB makes mouse and keyboard hotkey switching possible and provides reliable and instantaneous switching action. The previous implementations have only been able to support the basic mouse and keyboard features, by using only generic emulations. The True Emulation technology overcomes this limitation by simultaneously emulating the true character of the connected devices to all the computers. Now users can use the extra function keys, buttons, controls, and wheels that are commonly found an modern mice and keyboards.

Independent simultaneous device selection

One of the important keys of CCS4USB is flexibility. This switch allows to use mouse and keyboard on one computer, while USB peripherals are connected to other computers and speakers are connected to another. All the connected devices can be switched to any of the connected computers.

Channel selection options

The CCS4USB switch can be controlled by using 3 button mice, front panel controls or selectable keyboard hotkeys.RC4 remote switch can be used optionally to make selections. These switching options allow users to quickly reassign any connected device to any of the connected computers.

Broad USB 2.0 Hi Speed device support

Users can connect a wide range of the USB devices to the CCS4USB, such as printers, scanners and non standard human interface devices. With the flexibility this gives, users can be scanning documents onto one computer, while working at the other computer, and printing on another at the same time. To ensure a maximum reliability when connecting and disconnecting USB devices, the USB 2.0 switching action has been designed.

Options port for control and upgrade

An “Options” port allows the CCS4USB to be switched remotely by using ASCII codes. This port enables a four button RC4 switch unit to be used together with CCS4USB. This port can also be used for firmware upgrade.

Today Gefen, the digital connectivity solutions provider, announced the availability of two new GefenTV wireless HDMI extenders with smaller footprints, great performance and lower price. These devices are capable to transmit uncompressed High Def full HD 1080p with no latency which makes them an ideal solution for professional and consumer applications. They offer a quick and simple setup with no cables required.

The GefenTV Wireless HDMI Short Range (SR) transmits HDMI to any display located within 80ft away from the sender unit which plugs into the source. This extender can work with all blu-ray players, set-top boxes, laptops and any other sources that have HDMI output. It designed for in-room applications such as conference rooms. The simplicity to set-up and capability to connect three transmitter units to a receiver makes it easy to switch between different sources. Power to the transmitter unit is supplied through the USB port.

The GefenTV Wireless HDMI Long Range (LR) consists of a sender and receiver unit that can extend any HDMI source for up to 100ft. This long range extender device is capable of transmitting a high definition video and audio through walls which expands its applicability.

These extender devices support HDCP compliance, high definition resolutions up to 1080p and 3DTV pass through. Audio capabilities include DTS-HD Master Audio, PCM digital audio streams up to 7.1 channels and Dolby TrueHD.

Up to three sender units can be connected to a receiver modules of these extenders, therefore three sources can be displayed and switched by an included IR remote.

Both of these HDMI extension solutions have MSPR price of $399 and will begin shipping on May 13^th.

The UH-1BT is the latest addition to the Mini- Cat® brand video extension family of products. It can extend single link DVI or HDMI video signal for the distance of 230ft via a single CAT6 cable. This device transmits video signal with embedded audio without compressing it for the best quality reproduction. It supports HDMI 1.4, deep color, 3D, Full-HD 1080p and 4K video with pass through EDID and HDCP support. CEC, DDC and HPD, the secondary data channels, are also expanded transparently. Plug and play operation that requires no user adjustments ensures a real trouble-free experience.

The UH-1BT consists of a Sender and a remote. Each receiver is housed in a sturdy metal casing.  This device can virtually support all HDTV and PC resolutions. The competitive price is set to $399

The AV4PRO-DP by Adder is designed to control four computers with DisplayPort  technology from a single KVM console. This KVM switch employs Adder’s True Emulation Technology which allows USB HID devices to be constantly emulated to each computer. It also allows instant and reliable hotkey switching, while supporting extra features and keys of enhanced mice and keyboards. The AdderView also features two USB 2.0 channels that switch independently (Low, Full and High speed) and audio channel, providing users with an option to attach peripherals to different computers.

DisplayPort Video Support

This switch is DisplayPort 1.1 compliant, which is important for enabling new digital display experiences. DisplayPort easily supports high end Full HD monitors that feature such resolutions as 1920×1080 with 60Hz refresh rate at 12 bits per color, 1920×1200 at 120Hz refresh rate, and 2560×1600 at 60Hz with 10 bits per color, over standard cables.

True Emulation USB2.0 Technology

The AV4PRO-DP comes from the first KVM family of switchers that features Adder’s advances True USB Emulation technology. This technology provides fast and reliable switching action and makes possible to switch hotkey and mouse. The previous implementations used only generic emulations and therefore were able to support only basic mouse and keyboard features. The True Emulation technology can overcome these limitations by emulating the true character of the devices connected to all computers simultaneously. Now users can employ the extra function keys, buttons, wheels on modern mice and keyboards. The AV4PRO makes it possible for users in Graphic design, Animation, Post production and Architecture to use specialized interface devices like joysticks, 3D explorers and graphic tablets.

Independent Simultaneous Device Selection

The flexibility of AdderView Pro switch allows using the KVMA console to work on one computer, while speakers playing music from another computer and USB peripherals are connected to another. All connected devices can be still switched to any other connected computer like with any other KVM switch.

Channel Selection Options

The AdderView Pro can be switched by using the front panel controls, 3 button mice or selectable keyboard hotkeys.To make selections  RC4 remote switch can also be used. These switching features allow users to quickly reassign connected devices to any of the connected computers.

Broad USB 2.0 High Speed Device Support

A wide range of USB devices such as printers scanners and non common human interface devices can be connected to the AdderView. The great flexibility of this switch allows user to work on one computer, while scanning documents on another, and printing from another computer at the same time. The USB 2.0 switching feature has been thoroughly designed to provide high computer reliability while connecting  and disconnecting USB devices.

Options Port For Control, Synchronization and Upgrade

The AV4PRO-DP can be remotely switched using a 4 button RC4 switching unit through the “Options” port. In order to create a multi video head switching system, two or more units can be switched synchronically by linking “Options” ports. This port is also used for upgrading firmware, which guarantees that the hardware delivers the real value for a long time.

Gefen company, the digital connectivity solutions provider, recently announced that two of its new breakthrough devices began shipping.The Extra Long Range GefenPRO HDMI Extenders with POL I and II provide an extension of multiple signals for up to 330ft over just one CAT5 cable.
Based on Power over Ethernet standard, Gefen’s POL technology delivers power to the receiver unit  using AC power from the sender unit. Each receiver unit has an additional 5V output to power supplemental devices like splitter, switcher or scaler at the display location.

The GefenPRO ELR HDMI Extender with POL is a great solution for set-ups in which power requirements are limited or AC power outlets are not available at the receiving side, for example when mounting projectors at the ceiling. By reducing the number of cables from two to just one CAT5 cable, this device allows installers to simply tap into existing in-wall twisted pair cabling.

Full HD 1080p resolutions, audio, 3DTV support, Ethernet, IR remote, RS-232 and power can be transmitted via single CAT5 cable to the remote location.  RS-232 and the IR backchannel can be used to control display from the remote location. For an additional convenience each receiver can be wall mounted. 3DTV, lip sync, deep color and audio delay are advanced HDMI features of this unit.

The ELR HDMI Extender over CAT5 with POL II by GefenPRO provides an optional receiver with one extra HDMI input. Therefore users can switch between two HDMI sources when one source is connected to the sender, and another one is connected to the receiver. With auto switching from the front panel, RS-232 control or by IR, both HDMI sources can be simultaneously viewed at the remote location. When one of the HDMI source powers down, the receiver unit will automatically switch to the other source.
Both of these devices are HDBaseT compliant, have a built-in power supply and rack mountable.

For more information about this product and for purchasing please click here.

At this year’s NAB show, broadcast industry’s premier business event, the Adder Corporation introduced to the US market the AdderLink Infinity Dual. This device enables the creation of a flexible infrastructure letting the operator of the computer the ability to control it from almost any distance via gigabit network without any loss in capabilities, video resolution and USB or audio latency.

The AdderLink Infinity Dual is capable of running any size matrix switch with USB, DVI, RS-232 and audio on all ports. The only limitation is how the traffic architecture is configured and user’s network. This IP based matrix switch features almost unlimited extension possibilities. This ability makes the AdderLink Infinity Dual a great solution for the broadcast industry, and allows having any number of control rooms and studios to be connected, regardless of their location.

Another undoubted advantage of AdderLink Infinity Dual is that it removes heat and noise that are coming from hard drive away from the sensitive broadcast environment , allowing producers to concentrate on their work without any distraction.

Tim Conway, VP of Adder Corporation says: “AdderLink Infinity Dual offers real benefits to broadcasters. This has been recognized by several broadcasting companies worldwide, which are already using our solutions to power the production of radio and television content to great effect, from content origination and post-production through to the control room. The advantages are not just environmental and creative: AdderLink Infinity Dual enables an organization to keep hard drives containing original and sensitive content away from studios frequented by visitors, therefore lowering the security risk.”

The new automation systems, designed by Gefen, are versatile and may be used in a wide variety of settings. They provide a comprehensive method of controlling every audio/video device in a setup and additional features such as HVCA control and lighting

Professional Automation Control System (PACS)

The PACS simplifies the control of switchers, distribution amplifiers, HDTV displays, scalers and more, with three RS-232, ten contact closures and eight IR emitters from a central interface. A/V devices equipped with RS-232 or IR can be efficiently accessed by this control system. Volume levels, on/off power and video distribution can be controlled via IP with a simple web interface. Users can access A/V systems from anywhere using their computers or laptops. Pre-configured commands can be memorized by storing IR commands in PACS. This feature makes it simple to automate and centralize A/V devices.

Mini Professional Automation Control System (Mini PACS)

The Mini PACS system has the same features as the PACS, but it is scaled down and can be wall mounted having one RS-232, two relay closures and three IR emitters. This is perfect solution for A/V setups where equipment may not be installed in a single rack, and a great choice for distributed systems that may require a cost-effective anytime/anywhere access.

Gefen Audio/Video Automation System (GAVA)

GAVA can work together with PACS, which gives an option to control all key A/V features in a home with an additional feature to automate HVAC, lighting and more just by using tablet or smart phone. GAVA allows control via an interface that can work with all tablets and smart phones, while PACS can be pre-programmed to store all RS-232 and IR commands for connected devices. It is optimized to work with Android, iPhone and iPad as the control devices. Users can control any connected device from anywhere through their tablets or smart phones when GAVA is working together with PACS. This control system is also very easy to program with a help of an intuitive configurator process which can be managed  by anyone in minutes. Therefore integrators and installers can easily demonstrate and sell this system because of its plug and play design. Quick and simple setup without a training and extensive programming is possible with its user-friendly interface. It also doesn’t require Internet access for configuration or use, even though it is designed to work on network.

At Digital Signage Expo Gefen announces a new Wireless HD Extender for resolutions up to 1080p. This device is capable of sending full HD 1080p content to any display for up to 75ft, and immune to line-of-sight requirements, delivering video and audio through walls. These features make this extender suitable for applications where running a cable would be a hassle. Instant one-to-one transmission and high definition reception further enhance this new device’s performance.

Installation of this device is very simple and requires a dongle-type transmitter to be connected to the audio/video source, and a small receiver to be connected to the remotely located display. The system delivers high definition audio and video in the HDMI format from source to display using 5 GHz radio frequency. Additional two-channel audio is supported by RCA outputs at the receiver module.

The Wireless HD Extender for 1080p by Gefen supports all high definition devices using HDMI format, that include Blu-ray players, set top boxes and gaming consoles. This next generation extender’s value in enhanced by the ability to transmit signals through walls with no line-of-sight requirement applicable. Its guaranteed 75-foot range for transmitting full HD 1080p signals makes this device a valuable solution for digital signage installations in entertainment venues, educational facilities, bars and restaurants. Video source can be located out of sight while the HD video and audio is wirelessly sent to display.

Gefen, the digital connectivity solutions provider, recently announced the shipping of new DVI over fiber extenders.  Three out of four new devices use small, modular  sender and receiver, that can be a lightweight and efficient solution for streamline installations. Fourth device features the traditional rack mount sender and receiver for units for KVM extension. In applications where electromagnetic interference would be an issue or when several extenders are used in tight spaces, the use of fiber optic cable would be an ideal.

DVI Extender 1FO  DVI-CP-FM10

The pig-tail sender and receiver that take up little space are used in this extender, which is able to extend DVI up to 1000ft, using one strand fiber optic cable terminated in SC. 1920×1200 high resolution video is supported by this unit. Constant sync of the display and the video source is provided by Virtual EDID programming. This DVI unit is interchangeable with HDCP-compliance and with HDMI.

DVI 1FO Extender  DVI-FM15

Reliable method of connecting DVI directly at the display and source is provided by these two small sender and receiver units. 1920×1200 high resolution video can be extended up to 328ft, using single-mode fiber optic cable or up to 1640ft using a multi-mode fiber optic cable. More robust solution than existing products that support same distances is provided by die-cast modules.

DL DVI 2FO Extender DVI-FM2500

The two small sender and receiver modules connect directly to the DVI connectors at the display and source. Dual link DVI with resolutions up to 3840×2400 can be extended up to 1640ft employing two multi-mode fiber optic cables terminated at SC. This would be an ideal solution for an alternative methods of dual link DVI extension for long distances.