The VS0116 16 Port Video Splitter with Audio duplicates and enhances the video and audio signals from an input source (i.e. a computer) and routes them to up to 16 output devices (monitors, projectors, etc.)Furthermore, it can be cascaded to additional ATEN video splitters to support hundreds of monitors.
The 1x2 VGA Hub allows computers with VGA graphic cards to be connected to one or two VGA compatible monitors or projectors. The VGA splitter keeps your desk clutter-free, relocating your computer to a safe and secure area, while allowing you to work in a quieter environment.
The x:4 VGA Hub allows a computer with a VGA graphic card to connect to up to four VGA compatible monitors or projectors at the same time. Because it allows one computer to drive multiple monitors for simultaneous viewing.
One VGA Input, Eight VGA Outputs The 1x8 VGA CAT5 Distribution Amplifier is the perfect solution for anyone who needs to send one source to multiple displays in remote locations at the same time. The 1x8 VGA CAT5 Distribution Amplifier has eight RJ-45 output connector and one VGA input.
The VP-8K is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It takes one input, provides correct buffering and isolation, and distributes the signal to eight identical outputs
The VP-111K is a high-performance line driver for signals exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs
The VP-210K is a high-performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The unit provides controls to compensate for signal losses inherent in long cable runs.
The VP-2L is a high-performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs.
The VP-10 is a high-performance distribution amplifier for RGBHV video signals. It provides correct buffering and isolation and distributes the signal to all 10 identical outputs.
he Atlona AT-VGA10SS is a 1-input and 10-output VGA and 2ch audio distribution amplifier designed to distribute an audio/video signal up to 10 locations. The VGA10SS can extend the audio/video signal through a CAT5,6,7 connection up to 1920x1200 @ 400ft. The VGA10SS is also featured with local VGA and audio outputs designed to either connect to a local video display or loop out to another VGA10SS amplifier.
$109.99
