Atlona DVI Passive Extender over Single Cat5 up to 100ft. Model: AT-DVI15SRS

The Atlona AT-DVI15SRS is a perfect solution for those who need to extend DVI signal over long distance, over single cat5 or cat6. The Atlona DVI Extenders can handle any resolution up to 1280x1024 at up to 100ft and 1920x1200 up to 50ft. Atlona is the only company that has DVI balun system which is using a single cat5 or cat6 wire at this time.

The installation of the Atlona DVI Over CAT5 is quick and easy, simply attach Sender unit to your DVI source such as a Computer, attach the Receiver unit to your display, then connect 1 x Cat5 or Cat6 cable and you are done. The signal will be sent with perfect video quality. We do recommend to use shielded cat5 or cat6 wire to get the best quality signal.

Key Features:

• Perfect video quality up to 1920x1200 up to 50ft and up to 1280x1024 up to 100ft
• Supports CAT-5/CAT-5E/CAT-6 cables of variable types.
• Supports high definition resolutions up to 1080P or 1920x1200
• Receiving unit can learn EDID information for DVI/HDMI enable display device
• Easy to install and simple to operate.

Technical Specifications:

• Video Bandwidth: 1.65 Gbps (DVI 1.1)
• Resolutions: 1920x1200 (up to 50ft ) and 1280x1024 (up to 100ft)
• Input TMDS signal: 1.2 volts (peak-to-peak)
• Input DDC signal: 5 volts (peak-to-peak)
• DVI Connector: DVI-D (Digital Only)
• RJ-45 Connector: 2 indication LEDs
• Dimensions: 50mm x 40mm x 20mm / 2”x1.6”x0.8” (L x W x H)
• Weight: 0.1lb each unit

Package Includes:

• One AT-DVI15SRS ( sender and receiver units )
• One Users manual

Warranty:

3 year manufacture warranty (parts&labor)