Video Hum Eliminators are designed to remove interference created by long cable runs, 60 cycle power demands, grounding noise and magnetic coupling. Normal voltage differences between system grounding points cause small AC power currents to flow through video cables.
The OC-1N is a high-performance optical isolator for video or sync signals. It provides complete isolation between devices to eliminate video hum, ground loops, and DC offsets that can degrade picture quality.
The Ocean Matrix model VHE-14-RM is designed to remove ground loop interference created by long cable runs, 60 cycle power demands, and magnetic coupling
The OC-2 is a high-performance optical isolator for video or sync signals. It provides complete isolation between devices to eliminate video hum, ground loops, and DC offsets, which can degrade picture quality.
The OC-4 is a high-performance optical isolator for video or sync signals. It provides complete isolation between devices to eliminate video hum, ground loops, and DC offsets, which can degrade picture quality.
The Atlona AT-COMP500 is a down scan converter for Component Video signals. It will convert Component HDTV video signals up to 1080p to Composite and S-Video signals simultaneously in either PAL or NTSC formats as well as offer a Component Video Pass-Though Connection.
The 401Dxl is a high-performance format converter and switcher for composite video and s-Video signals. It switches one composite or one s-Video (Y/C) input to a single s-Video (Y/C) output.
The SG-6xl is a sync stabilizer for composite video and s-Video (Y/C) signals. It identifies and corrects missing or erroneous syncs in a video signal.
The FC-10Dxl is a high-performance bidirectional transcoder for composite and s-Video (Y/C) signals. The unit converts a composite video or s-Video input through a digital comb filter to a composite and s-Video (Y/C) or component (YUV/RGB) video output.
$16.94
